AKK FPV VTX Tables for Betaflight 4.1

For AKK VTX Table, please download here.

For TX5000AC, please note:

1) You can only input 8 groups of data on Betaflight, and our frequency table has 12 groups, so the last 4 groups cannot be controlled by Betaflight and can only be adjusted by buttons.
2) You cannot input frequency information above 6000MHz on Betaflight, so there are 6 frequencies in the Band U group that can only be filled with 0, which means that these frequencies can only be adjusted by buttons.

For Alpha VTXs and Ultra Long Range 3W All Channel VTX, please note:

1) You can only input 8 groups of data on Betaflight, and our frequency table has 10 groups, so the last 2 groups cannot be controlled by Betaflight and can only be adjusted by buttons.

Which Smartaudio Version does AKK FPV VTX use?

After Betaflight4.1 released, Smartaudio and Tramp protocols need to be configured before using. What you need to know is that AKK FPV VTX uses TBS Smartaudio 2.0, which is the most popular Smartaudio protocol version.

Daily Operation Details

1.Select TBS Smartaudio 2.0.

2.Then let go to the Video Transmittor Part. Click the place to get the Smartaudio for AKK VTX

3.Down loan the Smartaudio 2.0 version and then go back to the Video Transmitter Page. Load from the file of Smartaudio and use it on the Betaflight.

Notes: Most VTX connect to FC TX3 and do the right setting on Betaflight UART 3. Only few connect to TX1 or TX4, please combine your FC user manual to figure out what happens

Frequence Setting

AKK VTX with Smart audio nearly all has 5 bands 37 channels. Just keep the frequency as the picture attached.

Power level Number

Here we must understand how many power levels your AKK FPV VTX has.

AKK X2-Ultimate FPV VTX has four power levels while AKK Race VTX only has two, so we should choose 2 for Race VTX or 4 for AKK X2-Ultimate FPV VTX. You can find the power level number on the product manual too.

Value and Value Label

The most troublesome is the value and value label. Take it easy!

If your AKK FPV VTX has 2 power levels, pls set it 0,1as the value. And the label should match the power output. Like the AKK Race FPV VTX, the power output is 25mW, 200mW, so just fill them on the value label.

Race VTX Table

vtxtable bands 5

vtxtable channels 8

vtxtable band 1 BOSCAM_A A FACTORY 5865 5845 5825 5805 5785 5765 5745 5725

vtxtable band 2 BOSCAM_B B FACTORY 5733 5752 5771 5790 5809 5828 5847 5866

vtxtable band 3 BOSCAM_E E FACTORY 5705 5685 5665 0 5885 5905 0 0

vtxtable band 4 FATSHARK F FACTORY 5740 5760 5780 5800 5820 5840 5860 5880

vtxtable band 5 RACEBAND R FACTORY 5658 5695 5732 5769 5806 5843 5880 5917

vtxtable powerlevels 2

vtxtable powervalues 0 1

vtxtable powerlabels 25 200

If your AKK FPV VTX has 4 power level, set it 0,1,2,3 as the value and the label should match the power output too. Like the AKK Race Ranger VTX, the power output is 200mW, 600mW,1200mW, and 1600mW, fill them on the value label too.

AKK Race Ranger VTX Table

vtxtable bands 5

vtxtable channels 8

vtxtable band 1 BOSCAM_A A FACTORY 5865 5845 5825 5805 5785 5765 5745 5725

vtxtable band 2 BOSCAM_B B FACTORY 5733 5752 5771 5790 5809 5828 5847 5866

vtxtable band 3 BOSCAM_E E FACTORY 5705 5685 5665 5645 5885 5905 5925 5945

vtxtable band 4 FATSHARK F FACTORY 5740 5760 5780 5800 5820 5840 5860 5880

vtxtable band 5 RACEBAND R FACTORY 5658 5695 5732 5769 5806 5843 5880 5917

vtxtable powerlevels 4

vtxtable powervalues 0 1 2 3

vtxtable powerlabels 200 400 800 1600

If you want to learn more about Betaflight 4.1 or AKK VTX Table, please search “AKK VTX Table” or “Betaflight4.1” on Youtube.